371 this jan connector is a board-to-board connector with stacking height 1.0mm (.039") and 0.4mm (.016") pitch, which is the lowest-profile connector in the [electro mechanical component] industry. in consideration of operability at user side, although it is 1.0mm (.039") low profile, when mating receptacle with plug, the connector structure, where the large amount of guiding connector can be taken, is adopted, and differentiates jan connector with added value. specifications ?current rating: 0.2a ac, dc ?voltage rating: 30v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/70m ? max. after environmental testing/140m ? max. ?insulation resistance: 50m ? min. ?withstanding voltage: 100v ac/minute * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 jan connector board-to-board connectors 0.4mm (.016") pitch emboss tape features ?locking mechanism of contact because of the locking mechanism of the contacts which is made use of the spring performance, after repetition of mating and unmating, lock strength and a feeling of a click are very good. ?wiping contact structure concentrated stable electrical performance is realized by mating combination of bellows contact roll side on plug and fracture surface side on receptacle. ?reinforcement tabs signal contacts are protected from any external force after mounting on pc board, by soldered reinforcement tabs situated out side of wafer. ?solder entry prevention the gold-plated contacts (nickel-stripe) are also available which prevent solder from rising under high-activity reflow condition.
372 jan connector b 2.7(.106) 0.9 (.035) a 0.4(.016) model no. dimensions mm(in.) ab q'ty / reel cir- cuits 20 24 34 40 60 20p-jank-gs-tf 24p-jank-gs-tf 34P-JANK-GS-TF 40p-jank-gs-tf 60p-jank-gs-tf 5 3.6(.142) 5 4.4(.173) 5 6.4(.252) 5 7.6(.299) 11.6(.457) 5 5.6(.220) 5 6.4(.252) 5 8.4(.331) 5 9.6(.378) 13.6(.535) 4,000 4,000 4,000 4,000 4,000 material and finish contact: phosphor bronze, nickel-undercoated, gold-plated housing: lcp, ul94v-0 solder tab: brass, copper-undercoated, tin-plated plug b 3.7(.146) 0.8 (.031) a 0.4(.016) receptacle note: 1. the products listed above are supplied on embossed-tape. 2. nickel-stripe product: ?san?instead of ?s model no. dimensions mm(in.) ab q'ty / reel cir- cuits 20 24 34 40 60 20r-jank-gs-tf 24r-jank-gs-tf 34r-jank-gs-tf 40r-jank-gs-tf 60r-jank-gs-tf 5 3.6(.142) 5 4.4(.173) 5 6.4(.252) 5 7.6(.299) 11.6(.457) 5 7.2(.283) 5 8.0(.315) 10.0(.394) 11.2(.441) 15.2(.598) 4,000 4,000 4,000 4,000 4,000 material and finish contact: phosphor bronze, nickel-undercoated, gold-plated housing: lcp, ul94v-0 solder tab: brass, copper-undercoated, tin-plated note: 1. the products listed above are supplied on embossed-tape. 2. nickel-stripe product: ?san?instead of ?s
373 pc board layout (viewed from component side) 0.4 0.03 (.016 .001) 0.7 0.1(.028 .004) a 0.05(.002) 0.35 0.1 (.014 .004) 0.5 0.1 (.020 .004) 2.4 0.1(.094 .004) 2.7 0.1(.106 .004) 3.8 0.1(.150 .004) 0.2 (.008 ) 0 +0.05 0 +.002 jan connector 330 2.0(12.992 .079)dia. 2.0 0.5 (.079 .020) 13(.512) dia. feeding direction w1 ( ) +2.5 -1.0 +.098 -.039 taping specifications note: 1. specifications conform to jis c 0806. the tape width, connector loading recess square hole dimensions, etc. are determined b y the number of circuits and external shape of the connector to be loaded. 2. specifications are subject to change without prior notice. note: 1. tolerances are non-cumulative: 0.03mm ( .001") for all centers. 2. the dimensions above should serve as a guideline. contact jst for details. w feeding direction 1.55 0.05 (.061 .002)dia. carrier tape cover tape 2.0 0.1 (.079 .004) 4.0 0.1 (.157 .004) 8.0 0.1 (.315 .004) f 0.1 (.004) 1.75(.069) a 0.05(.002) 1.05 0.1 (.041 .004) 0.7 0.1(.028 .004) 1.8 0.1 (.071 .004) 3.7 0.1(.146 .004) 4.1 0.1(.161 .004) 5.1 0.1(.201 .004) 0.4 0.03 (.016 .001) 0.2 (.008 ) 0 +0.05 0 +.002 dimensions mm(in.) fw q'ty / reel cir- cuits 20 24 34 40 60 5 7.5(.295) 5 7.5(.295) 11.5(.453) 11.5(.453) 11.5(.453) 16.0(.630) 24.0(.945) 24.0(.945) 24.0(.945) 24.0(.945) w1 17.5( 1 .689) 17.5( 1 .689) 25.5(1.004) 25.5(1.004) 25.5(1.004) 4,000 4,000 4,000 4,000 4,000 receptacle dimensions mm(in.) fw q'ty / reel cir- cuits 20 24 34 40 60 5 5.5(.217) 5 7.5(.295) 5 7.5(.295) 5 7.5(.295) 11.5(.453) 12.0(.472) 16.0(.630) 16.0(.630) 16.0(.630) 24.0(.945) w1 13.5( 1 .531) 17.5( 1 .689) 17.5( 1 .689) 17.5( 1 .689) 25.5(1.004) 4,000 4,000 4,000 4,000 4,000 plug feeding direction 1.55 0.05 (.061 .002)dia. carrier tape cover tape 2.0 0.1 (.079 .004) 4.0 0.1 (.157 .004) 8.0 0.1 (.315 .004) f 0.1 (.004) w 1.75(.069) feeding direction cover tape leader carrier tape the end part 160(6.299)min. connector mounting part 400(15.748)min. leader part 100(3.937)min. plug receptacle
374 assembly layout 1.0 (.039) [4.7 (.185) ] 3.7 (.146) jan connector
|
